Global Engineering Solutions Review

Marios Tsakas is Assistant Professor of Business Administration at the Department of Agricultural Development, Agri-Food, and Natural Resources Management of the National and Kapodistrian University of Athens. He holds a degree in Chemistry, a Masters degree in Chemistry and Environmental Technologies, and a Ph.D. in Business and Organizational Management with an Emphasis on the Health Sector. All of these degrees were obtained from the National and Kapodistrian University of Athens. He has published two scientific monographs, numerous publications in international and Greek scientific magazines, as well as contributions to the proceedings of international scientific conferences. Along side his academic career, he has worked as a distinguished executive in various private and public sector companies and organizations. Among other roles, he was CEO of DEDA S.A., where his key achievement was the expansion of natural gas networks in 45 cities across Greece, with investments exceeding 450 million. He has also held positions such as Special Secretary of the Financial and Economic Crime Agency (S.D.O.E.), General Secretary of the Municipality of Glyfada, and member of the Board of Directors of major public companies, including Hellenic Petroleum S.A. (ELPE), the Hellenic Foreign Trade Board (OPE S.A.), and the Athens Urban Transport Organization (OASA S.A.). He was Coordinator in Greek Committee for the implementation of the reforms in health sector, in the framework of the national program Health in Action 2013-2015 in cooperation with world health organization. He has worked for several years as a business consultant in the private sector, specializing in investments support and European program management, participating in the development, design, and implementation of co-financed projects worth hundreds of millions of euros. From 2020 to 2023, he served as a board member of the European energy organization. He is a member of the Administrative Committee of the Association of Greek Chemists. Since 2023, he has been the CEO of the Property Management and Development company of the University of Athens.

Dr. Sadam Alphonse is a PhD candidate in Process and Energetics (Renewable Energy) at Ngaoundere University (2023 – present), specializing in solar and wind energy, multi-objective optimization, energy economy, and smart grids. He holds a Master’s degree in Process and Energetics (2012–2017) from Ngaoundere University, where he focused on resolving drying equations using finite window methods, and a Bachelor’s degree in Mathematics and Physics (2005). Since 2021, he has served as a Regional Pedagogic Inspector in Physics for secondary education. As a Teaching Assistant at Ngaoundere University, he has instructed courses on renewable energy and power system planning and reliability, facilitating discussions and guiding students in their academic pursuits. His experience in secondary education includes roles as a Discipline Master since 2014 and a Physics Teacher since 2010. Additionally, he has contributed to academic research as a peer reviewer, earning a Reviewer Certificate from CISCT in 2023.

Dr. Mohammad Masiur Rahaman is an Assistant Professor in the School of Infrastructure, Indian Institute of Technology Bhubaneswar. He obtained his Bachelor's in Civil Engineering in 2010 from Jadavpur University, Kolkata. He worked as an Operation Officer in Indian Oil Corporation Limited from August 2010 to June 2011. He received his Master of Engineering (ME) and Doctor of Philosophy (PhD) in 2013 and 2018 from the Indian Institute of Science (IISc), Bangalore. Post his PhD, he was a Postdoctoral Research Associate in the School of Engineering, Brown University from June 2018 to September 2019. He was awarded a medal for the best doctoral thesis from the Institute Mathematics Initiative, IISc. His areas of interest are Fracture Mechanics, Topology Optimization, Thermodynamically Consistent Viscoplastic Damage Models, Peridynamics, Finite Element and Mesh-free Techniques, Modeling of Bio-inspired Composites, Geometric Mechanics and Biomechanics. Presently, he has twenty-four high-quality international journal publications.

Dr. Pratik Das is a dedicated researcher and biomedical engineer with a strong academic and professional background. Having earned a PhD in Biomedical Engineering, my research has primarily focused on wound healing therapeutics, including advanced materials and skin-specific microbial therapies aimed at combating antibiotic resistance. My innovative work in these areas has been recognized with accolades such as the Dr. Sarvepalli Radhakrishnan Best Researcher Award in 2021. With over three years of research experience, I have developed expertise in bioink fabrication, cell culture techniques, and advanced biomedical instrumentation. My contributions to cutting-edge projects in burn wound management and diabetic wound healing have resulted in several peer-reviewed publications. Additionally, I take pride in mentoring aspiring researchers and excelling in statistical analysis and project documentation. Beyond my research pursuits, I am an active member of the International Association of Engineers and the Nano Molecular Society. As I explore postdoctoral opportunities, I remain committed to advancing sustainable technologies in biomedical applications and driving innovation to address critical healthcare challenges.

Dr. Ali Akbar Firoozi serves as an Associate Professor in the Department of Civil Engineering at the University of Botswana. With a PhD in Civil Engineering and extensive experience in geotechnical and structural engineering, Dr. Firoozi has contributed significantly to both academia and industry. His research interests include sustainable construction practices, the resilience of infrastructure to environmental challenges, and innovative materials in civil engineering. Dr. Firoozi has authored numerous peer-reviewed articles and has been involved in various international projects aimed at enhancing the durability and sustainability of infrastructure systems.

Dr. Mahmood Anwar, BSc MEng PhD CEng MIMMM FIES FIMM FRSA SFHEA Lecturer | Department of Mechanical Engineering School of Computing, Engineering and Built Environment

Dr. Yang Yujun, Ph.D. in Engineering, Assistant Professor and Master's Supervisor at Xi'an Jiaotong University. The main research areas are low-carbon and positive building design methods, regional thermal comfort optimization design, elderly behavior and aging friendly design, etc. Serving as a guest editor in the Buildings(IF=3.8) journal. Serving as a reviewer in over 10 journals, including Building and Environment, Science of the Total Environment, Sustainable Cities and Society, etc. Published 15 academic papers in SCI indexed journals such as Building and Environment or Sustainable Cities and Society, and also published over 20 conference papers.

Dr. Mohamed A.F. Mahdy works as an Assistant Professor in the field of Architectural Engineering at the College of Engineering and Design, Kingdom University. He has extensive experience in teaching and supervising MSc and PhD students. His research interests include Architectural Engineering, the built environment, and sustainable urban design and planning. Dr. Mahdy is dedicated to advancing knowledge in these areas and contributing to the development of innovative, sustainable solutions in urban environments.

Dr. José Carlos Metrolho is a Coordinator Professor (Polytechnic Teacher) at the Informatics Department (Technical-scientific Unit) at Polytechnic Institute of Castelo Branco, PT. He holds a PhD in Industrial Informatics (2008). He has been teaching since 1995 and authoring several conference papers, journal papers, and book chapters since 1997. His main research interests include software engineering, mobile computing, low-code development, programming languages, and computer science education. He has served as President of the department and Director of the School on different occasions, among other positions.

Yuesheng Gao is a highly accomplished professional in chemical and mining engineering. He earned a Bachelor's and Master's degree in Mining Engineering from Central South University in China and a Ph.D. in Chemical Engineering from Michigan Technological University. His doctoral research included innovative work in mineral surface modification and characterization. Since 2010, Dr. Gao has excelled in the mining chemical industry, specializing in reagent development and mineral-processing flowsheet design. In 2021, he joined Arkema ArrMaz mining lab, leading projects on critical minerals like lithium and rare earth elements. His outstanding performance recently led to his promotion to Lead Engineer. Dr. Gao also serves as secretary for the Florida Society for Mining, Metallurgy & Exploration (SME) and is an editorial board member for several journals. He has published 25 papers cited over 1100 times and holds 8 international patents.

Professor Germin Elgohary is an esteemed member of various prestigious associations and organizations, including ECLAS (European Council of Landscape Architecture Schools), the Le-Notre Institute project, ISOCARP (The International Society of City and Regional Planning), and the Academic Committee for Landscape Architecture New Program at Ain Shams University. Specialization: Architectural Design/ Working Drawings/ Visual Design/ Green Architecture/Sustainable Landscape / Landscape Architecture.

Dr. Jose-Luis Olabarrieta has a robust background in renewable energy and mining, with over 20 years of experience in the sector. Throughout his career, he has contributed significantly to various projects and research initiatives, demonstrating expertise in both practical and theoretical aspects of these fields. His work has involved collaboration with industry leaders and academic institutions, underscoring his commitment to advancing sustainable energy solutions and innovative mining practices. His research interests encompass a wide range of topics, including Gearless Mill Drives, hydro generators, and microgrids. This expertise enables him to delve into both the theoretical foundations and practical applications of these areas. He has published extensively in these domains, contributing to academic literature and industry standards. His work has also led to the development of innovative technologies and solutions that have been implemented in real-world settings, significantly advancing knowledge and fostering innovation in the field. Additionally, his involvement in interdisciplinary projects highlights his ability to integrate diverse perspectives and methodologies, further enhancing the impact of his research.